AuviTran AVM500-ES Bedienungsanleitung

AVM500-ES User’s Manual 1

Rear Panel Description – Typical architecture 4 REAR PANEL DESCRIPTION 2- Power switch : switch on or off the main power supply 3- AC IN : mai

Powering an AVM500-ES for the first time 6 POWERING AN AVM500-ES FOR THE FIRST TIME AVM500-ES is a dedicated and versatile EtherSound network route

Powering an AVM500-ES for the first time To sum-up theses points, we can compare AVM500-ES to an EtherSound device with one input port and four outp

Powering an AVM500-ES for the first time Fig. 4: Example of architecture In this network, the AVY16-ES100 in the LS9 mixing console is the Primary

Powering an AVM500-ES for the first time L The following description of Netpatch is based on version 3.9.3 of ES-Monitor software, which is the offi

Powering an AVM500-ES for the first time 6.2.1 Example #1 - NAI48-ES {ch1-16} to AVY16-ES100 {ch1-16} If you want to route NAI48-ES channels direct

Powering an AVM500-ES for the first time Fig. 8: First step automatic Matrix patch AVM500-ES User’s Manual v2.1 AuviTran 2010 16

Powering an AVM500-ES for the first time 6.2.2 Example #2 – AVY16-ES100 {ch13-16} to NXAmp {ch1-4} Final step, and one more time the same logic. Ju

Powering an AVM500-ES for the first time Fig. 10: Second step - Patched More information, tips and tricks regarding Netpatch is available in ES-M

Powering an AVM500-ES for the first time 6.3 Why using Star Architecture instead of basic Dasy-Chain? For a simple network as described previously,

AVM500-ES User’s Manual 2FCC INFORMATION (U.S.A) This device complies with Part 15 of the FCC rules. Operation is subject to the following two co

Powering an AVM500-ES for the first time A classic example is a recording studio, with multiple recording rooms. If each room is a branch of the st

Powering an AVM500-ES for the first time 6.4 Limitations of the Mono Network Mode Mono Network Mode is the factory default mode, and the simplest w

Powering an AVM500-ES for the first time Fig. 15: Improper wiring of port {3rd} (EtherSound stream on the port) AVM500-ES User’s Manual v2.1 Auv

Splitting networks for extended capacities 7 SPLITTING NETWORKS FOR EXTENDED CAPACITIES In order to expand capacities of AVM500-ES, and to bypass t

Splitting networks for extended capacities Port A generates its own clock, and sends it to other ports and to the digital audio matrix. Doing so, al

Splitting networks for extended capacities 7.2 Generic Multi Networks Mode – Software configuration We saw in chapter 7.1 an interesting way to exp

Splitting networks for extended capacities Fig. 20: Internal wiring for 3rd port remote control Fig. 21: ES-Monitor control box for port dissoci

Splitting networks for extended capacities 7.2.2 Example of dissociated network The following Fig. 22 represents an example of network architecture

Splitting networks for extended capacities Fig. 23: List and Tree view of the networks Fig. 24: ES-Monitor configuration for the dissociated

Splitting networks for extended capacities 7.2.3 Building Ring Architecture EtherSound ES100 technology allows a new kind of network architecture th

AVM500-ES User’s Manual 3 WARNING Always follow the basic precautions listed below to avoid the possibility of serious inj

Splitting networks for extended capacities 7.3 Advanced Users: Multi Network Mode – Input configuration This mode requires good knowledge of AVM5

Splitting networks for extended capacities Some EtherSound compatible devices need to be Primary Master in order to have remote control capabilities

AVM500-ES in ES-Monitor software AVM500-ES User’s Manual v2.1 AuviTran 2010 32 8 AVM500-ES IN ES-MONITOR SOFTWARE 8.1 Software Installation Pl

AVM500-ES in ES-Monitor software 8.3 AVM500-ES Properties Page in ES-Monitor When selecting the properties page, ES-Monitor will display the follow

AVM500-ES in ES-Monitor software 8.4 AVM500-ES Matrix Page in ES-Monitor If the Matrix page is selected, ES-Monitor will display following informat

AVM500-ES in ES-Monitor software Each row will display the name of the port / channel that is patched to it. This helps you to remember quickly

AVM500-ES in ES-Monitor software If you click on a couple of collapsed row / column, this will create a diagonal on the 16 channels. You can als

AVM500-ES in ES-Monitor software 8.5 AVM500-ES Control Page in ES-Monitor Control pages are quite different depending on the port that is currently

AVM500-ES in ES-Monitor software 8.5.2 Port Configuration box As exposed in paragraph 7.2 Generic Multi Networks Mode – Software configuration, AVM

AVM500-ES in ES-Monitor software 8.5.4 Clock Control box AVM500-ES has multiple possible sources of audio clock. The Clock Control box helps you ch

AVM500-ES User’s Manual AuviTran 2010 4ELECTRICAL AND ELECTRONIC INTERFERENCES RISKS This Product uses high frequency digital circuits that might

Tunneling – General information 9 TUNNELING – GENERAL INFORMATION Since version 0x110B / 0x118B of AVM500-ES firmware, multiple tunneling communic

Tunneling – General information 9.1.2 And if AVY16-ES100 is plugged on another port? Let’s just see quickly what would be the configuration if AVY1

Tunneling – General information 9.2 Ex. 2: Multiple tunneling – Port dissociation As detailed in chapter 15, dissociating ports allows multiple tun

Tunneling – General information 3. On SB168 #1 control page, create a unicast path to AVM500-C 4. On AVM500-ES Port C, open a path between SB1

Serial port Interpreter 10 SERIAL PORT INTERPRETER Since AVM500-ES firmware version 0x110C/0x118C, back panel Serial Port embedded a command interpr

Serial port Interpreter Now, in Port A control page, select “Serial Port” in “Egress Port for Tunneling” combo box. And finaly, turn-on interpreter

Serial port Interpreter AVM500-ES User’s Manual v2.1 AuviTran 2010 46 10.3.2 Set output patch Syntax: <Dest_Port><Dest_I/O>=<Sour

Serial port Interpreter AVM500-ES User’s Manual v2.1 AuviTran 2010 47 10.3.5 Get output patch Syntax: <Dest_Port><Dest_I/O>=?<CR&

Serial port Interpreter 10.3.6 Patch example with Tera Term ® This screenshot is made on an AVM500-ES with interpreter activated, and a serial cabl

ASIO Configuration 11 ASIO CONFIGURATION Since AVM500-ES firmware version 0x110C/0x118C, Ports C, D and E can be swapped from EtherSound to ASIO str

AVM500-ES User’s Manual v2.1 AuviTran 2010 5 TRADEMARKS All trademarks listed in this manual are the exclusive property of their respective owners

ASIO Configuration 11.2 Disable ASIO mode Follow the reverse path to disable ASIO streaming and return the port to its original configuration 1. t

ASIO Configuration Here is the NetPatch view of this architecture. You can see that AVA4-ES100 inputs are routed up to AVM500-B. Then, channels fr

Auxiliary Power Supply – Firmware Update 12 AUXILIARY POWER SUPPLY AVM500-ES provides another source of power supply, to improve the reliability of

AVM500-ES User’s Manual v2.1 AuviTran 2010 6TTAABBLLEE OOFF CCOONNTTEENNTTSS 1 WELCOME!...

AVM500-ES User’s Manual v2.1 AuviTran 2010 79.1 Ex. 1: Communication between AVY16-ES100 and Serial Port... 40 9.1.1

AVM500-ES User’s Manual v2.1 AuviTran 2010 8 1 WELCOME! Thank you for purchasing AuviTran’s AVM500-ES. We hope you will enjoy using it. This pr

AVM500-ES User’s Manual v2.1 AuviTran 2010 9 3 TECHNICAL SPECIFICATIONS General Size 483 x 253 x 44mm (19’ rack / 1U Height) Power Consumption